Punch Machine 3 In 1 NC Servo Straightener Feeder With Coil Thickness 0.3-3.2mm

With the continuous improvement of safety, production efficiency and product precision in the manufacturing industry, the single-punch production process is gradually replaced by the continuous stamping process, and then the peripheral equipment manufacturers of the press manufacture various types of punch feeders instead of the traditional ones. The manual feeding method, the most well-known of which is the air feeder and the roller feeder.

The NC servo feeder is a new type of feeder that came into being under the general environment of stamping. It is powered by servo motor, touch screen and PLC make up control system. The feeder's relaxation and feeding are synchronously provided by the punching cam during the stamping process. It is truly a combination of high efficiency, high precision and easy operation. It is a perfect combination. A truly efficient and practical feeding device.

When using the Ruihui NC servo feeder in practice, fix the feeder to the center of the side of the punching table through the mounting plate, then connect the feeder's relaxation and feeding signal line, connect the external air source of the feeder, and support the material. The rack is introduced into the feeder until it is fed into the punching die, and the pressing spring is adjusted to make the material be pressed tightly. At the same time, the position of the retaining wheel on the pallet is adjusted, and then the single punching die can be used.

During the operation of the NC servo feeder, the servo motor drives the lower roller through the timing belt, and the lower roller drives the upper roller through the gear teeth. The spring clamps the feeding and the cylinder relaxes and feeds the structure, so that the material is stepped between the upper and lower rollers. The transportation, relaxation and feeding signals are sent out by the punching machine, and the relaxation point is accurate. It is completely synchronized with the punching machine, realizing high-precision feeding, low-term failure rate and good stability. It has become the preferred feeding material for stamping customers device.

The 3-in-1 servo roller feeder is a fully automatic feeding device for feeding, rectifying and material racking. It is high-tech, high-precision and high-efficiency. It can be said to be the top performance of the correcting feeder in the peripheral equipment of the punching machine.
It has many functions and advantages, saves space and is durable, easy to operate, and has excellent effects on special length, extra-wide, and thick materials. It is considered to be an advanced automatic feeding device in the industry.
1. 3 in 1 feeder roller is not the same, in the leveling or feeding part appears on one side of the seam to sew small to lead out the running edge.
2. 3 in 1 feeder material frame of the material guide device has problems, the design is not reasonable. The irrationality of this design can easily lead to accidents.
3. 3 in 1 feeder press device is different in tension, the material wheel is not adjusted properly, the width of the adjusting guide wheel in the feeding part of the feeding is not adjusted to the appropriate size, and the width of the discharging wheel is not adjusted to the appropriate size.
4. 3 in 1 feeder mold positioning tip did not do.

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provide.