GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Punch Automatic Feeder, Bar Feed Processing Machine, Ruihui Stamping, velcro cutting machine, pv module production line
The automatic feeder refers to the active operation according to the rules and the established procedures. The person only needs to determine the requirements and procedures of the operation, and does not have to directly operate the feeding organization.
That is, the article is sent from one direction to another, and the process can actively and accurately complete the organization without human intervention.
Generally, there are testing equipment, feeding equipment, and the like. It is mainly used for the transportation of various materials and semi-products of industrial products, and can also cooperate with the next process to make production active.
The working principle of the automatic feeder is as follows:
The automatic feeding machine of the punching machine is simple and convenient to operate and has high precision. As long as the feed rate is set on the touch screen during operation, the servo system actively determines the feed length for each time according to the value set earlier, and the operator only needs to watch whether the machine is working normally without having to adjust each time.
The automatic feeding machine of sawing machine is controlled by Siemens PLC and Siemens touch screen, and the imported servo motor is used to control the feed feeding.
The PLC system controls the active feeding action, the active clamping action and the active cutting action. The selection of this machine can greatly reduce the labor intensity of the operator and supply production efficiency.
There are some subtle differences in the operation principle of different types of feeders, but the overall principle is similar. For the roller feeder, it consists of five parts: the distribution equipment, the transport wheel, the transmission rod, the bracket, and the control circuit. The dosing device discharges the bar to the transport wheel one bar at a time, and the transport wheel feeds the bar into the grinding zone.
During the operation, the bar is placed above the transport wheel. When the bar is worn and rotated, the bar friction is reduced in the condition of the rotation of the transport wheel, thereby improving the wear accuracy.
The vibration and noise during operation are very small, especially suitable for long bar and fine workpiece processing. At that time, the increasingly widely used roller type automatic feeders at home and abroad were able to be used in various types of centerless grinding machines.
After the cooperative processing machine tool completes the active feeding operation, after the bar material transportation of the storage box is finished, the machine tool actively waits for the feeding condition, and the warning device informs the operator to add the material.
The cooperation of the feeder is applied to punching machines, continuous molds, injection molding machines, and robots.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi