GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Feeder advantages:
The feeder has the advantage of being easy to operate. The feeder is an automatic feeding device integrating the material rack, the leveling machine and the feeder. The control knobs and switches of the whole device are all concentrated in the console, and the staff can control the whole situation without going back and forth.
The feeders are all equipped with high-tech and high-efficiency operation. Among all the punching machine, the punch feeder can be said to be the top performance correction. The feeder can be said to be an advanced automatic feeding device that is well known in the industry.
The feeder also has the advantage of convenient installation. According to the different requirements, the feeder is usually divided into three parts. The connection of the three parts is very simple and fast, and can be fixed by screws, which greatly reduces the time spent on installation and quickly enters. In the production state, the size of the installation is also small, which greatly saves the occupied area of the plant, so that the plant can accommodate more equipment, reduce the cost of plant rental, and maximize the benefits.
The feeder adopts imported core components, perfect lubrication system, and self-testing procedures, and the failure rate is extremely low. The whole core components of the stamping feeder are imported from Germany and Japan, such as Yaskawa servo motor and driver, Mitsubishi PLC, Omron Optoelectronics, Schneider's circuit breaker, and NSK bearings in Japan.
At the same time, the perfect lubrication system and self-inspection program make the whole machine wear very little, the failure rate is extremely low, and the maintenance is very simple.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi