GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Common reasons for the biasing condition of the feeder:
(1) Is the position of the material placed correctly?
(2) Is the position of the mold installation waiting?
(3) Whether the mold has a positioning pin to list out these problems:
1. Help the customer to check whether these phenomena exist or not, if there is help to solve these problems;
2. In the case of eliminating the above problems, the MAC feeder machine needs to be inspected when there is a biased material: Look at the balance of the loose screw adjustment. When the material is biased to the other side, twist the loose screw on the side until it is no longer biased.
Different from the traditional punching machine, the anchor bolt and the digging shock ditch are different. The installation of the high-speed punching machine, the precision punching machine and the anti-vibration are all realized by the anti-vibration foot. The installation is quick and easy.
At the same time, it is convenient and quick to adjust the level of the punching machine. When using the anti-vibration foot, it is only necessary to select the appropriate size according to the tonnage of the punching machine, and the punching position can be adjusted at any time according to the processing technology requirement, which is an ideal choice for modern processing.
The high-speed punching machine runs at a high speed, and the vibration is larger than that of the precision punching machine. The high-speed punching air cushion foot is composed of a plane, an air cushion body, a concave portion, a retaining edge, a convex fast, a pressure ring, a gas chamber and a gas valve, wherein the air cushion body and the bump are resistant to use. The soft plastic material is formed into a good support at one time.
After the high-speed punching air cushion foot is inflated, it is a bump multi-point contact instead of the traditional anti-vibration foot contact form, which ensures that the punching ground contact is more firm and stable, and the high-speed punching air cushion foot pressing ring makes the plane of the air cushion body and the punch base close contact.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi