GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Feeders are typically used to clamp steel plates to pneumatic clamps that are connected by dovetail slots. The fixture is easy to move, reducing material bending deformation and reducing dead zone. The feeder adopts high-precision servo motor, precision ball screw and high-performance linear rolling guide to meet the requirements of stamping process.
Various requirements are especially suitable for product parts with high processing precision, which overcomes the shortcomings of large punch vibration, unstable precision and short service life. In this era of rapid development, this automatic product is bound to be favored by more and more manufacturers.
The feeder is mainly used for the transportation of granular materials, powder materials and sheets, and the products are widely used. In today's society, more and more industries of feeders will be mechanized. The automatic feeder has high precision, environmental protection and time saving. This also greatly reduces the labor intensity.
Really achieve low cost and high return. newspaper. The feeder is specifically designed to transport granular materials, powders and flakes. The feeder has high precision, environmental protection and time saving, which greatly reduces the labor intensity. Industry insiders agree that more and more feeds will be used in the workshops produced by enterprises.
Abstract Feeder conveyor is a new type of product based on market demand, independent innovation and research and development. The machine tool clamps the steel plate with a pneumatic clamp connected by a dovetail groove. The fixture is easy to move, reduce material bending deformation and reduce dead zone. High-precision servo motor, precision ball screw and high-performance linear rolling guide are used to meet the requirements of stamping process.
It is especially suitable for product parts with high processing precision, and overcomes the defects of large vibration, unstable precision and short service life.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi