GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Feeder, roller feeder and CNC feeder are the three most commonly used feeding equipments in the stamping industry. The width, thickness and stamping process of the materials are different, but their application range is the same. It is widely regarded by customers as the most in the industry. Three kinds of feeding equipment are commonly used.
It is the most suitable for high-speed punch feeder. Its maximum feeding speed can reach 1200 times/min. The high-speed punching machine has its own special feeding device, ie, the clip feeder. Its high speed, stability and high precision are far less than other types. Feeding equipment.
Special clamping feeder for high speed punching machine:
1. The feeding speed is fast and the performance is stable: the main body of the clamp feeder is different in processing mode from other feeders. The use of an integrally formed frame structure fundamentally avoids the vibration of high speed stamping. At the same time, the structural design of a spherical cam and three flat cams maximizes the accuracy of high-speed feed.
2. energy-saving, quiet operation: the material feeder is driven by the output shaft of the punch. It does not need to consume other energy sources. Has good energy saving performance. The belt drive device is used to drive the pinch device. It can run quietly without any extra noise.
3. the adjustment is simple and intuitive, the debugging setting is fast: the adjustment of the feed length of the clip feeder can be adjusted only by adjusting the scale on the body, which is clear, fast, intuitive and accurate.
4. with special processing, improve the scope of application, the holder and releaser are stable, moderate pressure; will not cause any indentation on the surface of the material. The holder of the material feeder is specially designed according to the shape of different materials, and can be used with high-speed punching machine to process part of copper, aluminum alloy, electroplating material, magnesium alloy and so on. Irregularly shaped material.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi