GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Metal coils such as aluminum and steel are required to be leveled before being processed by stamping or the like. The core of the leveler is the leveling component, which usually includes the upper and lower seats.
And two rows of flattening rollers are respectively arranged on the upper seat and the lower seat, and the upper seat is usually suspended above the lower seat by using a cylinder, a spring or other device.
The gap between the upper and lower seats is adjusted by the adjusting device, that is, the gap between the upper roller and the lower roller is changed. During work, the flattened sheet will be passed between the upper and lower rollers, and the sheet will be rolled by the upper and lower rollers to achieve material leveling.
The two-stage leveling mechanism is in a stationary state or during the leveling operation, and the front ends of the upper and lower seats are fastened to the buckle body provided on the upper seat through the snap grooves on the buckle plate connected to the lower seat. To ensure smooth operation of the leveling mechanism to achieve leveling.
Before the leveling operation, when feeding is required, the rotation of the rotating shaft can be driven by the handle to rotate the eccentric wheel, and the rotation of the eccentric wheel causes the outer ring to generate an upward displacement in the vertical direction.
Therefore, the snap plate rigidly connected to the ring is also moved upward, and then the upper seat is topped up by the horizontally extending snap groove and the buckle body on the upper seat, and the rear end of the upper seat is pivotally connected to the lower seat rear end.
Therefore, the upper seat rotates in the axial direction of the pivoting, that is, the front end of the leveling mechanism opens an opening, so that the material can be easily entered into the double-stage leveling machine. After the material enters, the handle is rotated, and the upper seat can be restored and re-connected with the lower seat. , leveling operations.
The two-stage leveling machine can achieve better leveling effect and higher leveling efficiency in use, and it is very convenient to feed, disassemble and maintain, ensuring the smoothness of stamping production and the dimensional accuracy of stamping products, especially suitable for Leveling of 0.1-0.6mm metal thin material.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi