GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
The most common classification of three-in-one feeders is divided according to the material thickness of the applicable materials. The standard three-in-one feeder for medium sheets and the three-in-one feeder for medium-thick plates are suitable for thick plates. Thick plate three-in-one feeder, for thick plate three-in-one feeder with super thick plate.
Three-in-one feeder correction range This parameter, three-in-one feeder and ordinary feeder have only a single feeding function, it has three functions of unwinding, leveling and feeding.
It has the same range of corrective capabilities as the leveler, not as long as the material is within this thickness range, regardless of the material and width of the material.
For example, when the material thickness is at the maximum and the material width is the maximum, the three-in-one feeder cannot withstand it.
Even if you can use the cylinder to force the pressure to work, it is also overloaded, which will seriously damage the main components such as motors, rollers and gears.
Each type of model and each model of Ruihui three-in-one feeder has different correction capabilities, but one thing is the same, that is, the thicker the material needs to be flattened, the narrower its width.
Conversely, the thinner the flattening material, the wider the width. According to the materials of different materials, the correction ability of the three-in-one feeder is also different, the same thickness of material.
The lower yielding ability is wider than the high yielding capacity, such as aluminum and stainless steel plates, and the machine's ability to correct them is different.
In order to achieve high-precision leveling and good protection of the machine, please be sure to follow the correct range of the three-in-one feeder used.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi