GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Two-in-one rack and leveling machine, also known as two-in-one leveling machine, material rack and leveling machine, two-in-one, it is a machine that combines the material rack and the leveling machine optimally (material rack and whole The planes are directly connected together).
According to the thickness of the applicable material, it is divided into several basic models of thin plate type, precision type, medium plate type and thick plate type, although some models have high similarity with the three-in-one feeder.
However, there is no feeding function, and the latter must be equipped with an additional feeder to form an automated production line.
Ruihui mechanical two-in-one rack and leveling machine can realize the automatic unwinding and leveling of the material roll, which is the same as the function of the split material rack and leveling machine.
However, compared with the split type, it has the four advantages of space saving, simple installation and adjustment, easier feeding and feeding, and simple operation.
1. The two-in-one rack and leveling machine occupy a smaller area and can greatly save space in the factory.
Ruihui two-in-one leveling machine is a one-piece fixed structure, and the distance between the material frame and the leveling machine is greatly reduced. The model occupies a small area and can save customers very much. Large factory space.
2. Transportation and installation are easier.
The alignment of the production line machine and the punching die is the premise to ensure the quality of the leveling, feeding and stamping. The split type machine needs to position the material frame and the leveling machine one by one.
Ruihui Machinery's two-in-one rack and leveling machine can be placed directly at the center of equipment such as punching machines or shearing machines.
3. two-in-one rack and leveling machine because of the short distance between the machine, feeding and feeding is more convenient.
The split-type material rack and the leveling machine are far apart from each other. It is difficult to manually pull the material from the material to the leveling machine. When the special material is thick material, it is often necessary for many people to use the crowbar to press the material. Incoming material.
Ruihui mechanical two-in-one rack and leveling machine can easily feed materials when the material is thin sheet material. When the material is thick plate material, it will be equipped with press arm, support arm, folding arm, etc. The auxiliary feeding device can be easily fed by simply using the operating handle with simple point control.
4. The operation of the rack and leveling is concentrated on one electric box for control, and the operation is more convenient.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi