GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
As the highest-end stamping automation equipment, NC servo feeders have been used for many years abroad. The NC servo feeder is a new automation device designed for the messy stamping process.
Compared with the roller feeder, it has a very significant advantage. It can complete the feeding of multiple steps in the same stamping technology on one punching machine to meet the diversified production needs of customers.
The production line consisting of its punching machine is called the short-flow stamping automatic production line because of its small footprint and simple work flow. It has gradually replaced the split-type stamping production line share to become the mainstream production line of the foreign stamping market.
The feeding parameters of the NC servo feeder are controlled by the customer's free touch screen programming. The operation is simple and the function is high. The electronic control system composed of the servo motor has the highest feeding accuracy, high applicability and reliability.
1. a variety of relaxation methods are available for selection, satisfaction is not the same as customer needs:
There are two types of relaxation: pneumatic relaxation and mechanical relaxation. Customers can choose according to their own mold and stamping characteristics. At the same time, Lihao has a mechanical and pneumatic relaxation integrated feeding machine type, which can be used to complete two kinds of relaxation methods. Switching, when the end of a machine is multi-purpose, when replacing different goods and molds, it is not necessary to purchase new feeding equipment from scratch, and fundamentally reduce the production products.
2. intuitive and fast operation form:
The NC feeder adopts a 7-inch touch screen to adjust the button dual-control operation method, which can set the feed parameters in a simple and rapid manner.
3. The feeding step setting is not restricted:
The traditional roller and air feeder stepping range has a range of use, while the servo feeder is completely free of any mechanical constraints. It can be set between 0-10 meters through the touch screen, which greatly improves the applicable range of the equipment.
4. the unique feeding parameter storage function, fast and complete the automatic production:
Multiple sets of feeding parameters can be stored in the feeder as needed, and when the corresponding mold is replaced, it can be directly called to greatly reduce the downtime debugging time.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi