GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
The belt feeder is a kind of conveying equipment with mature production technology and wide use. It has the characteristics of the most typical continuous feeder and has developed rapidly in recent years.
Its main advantages are: simple structure, light weight and easy manufacture; flexible transportation route layout, wide adaptability, and can transport a variety of materials; fast conveying speed, long conveying distance, large conveying capacity and low energy consumption.
It can be continuously transported, work smoothly, and does not damage the materials being transported; it is easy to operate, safe and reliable, easy to maintain and repair, and low in maintenance and management costs.
The main disadvantage of the belt feeder is that the conveyor belt is easy to wear, and its cost is high (about 40% of the cost of the feeder); a large number of rolling bearings are required; the unloading device must be installed when discharging in the middle; the ordinary tape type is not applicable to When the conveying angle is too large.
At present, the belt feeder has been standardized, serialized, and the performance is constantly improved, and new models are constantly available.
The main advantages of the screw feeder: simple structure, low manufacturing cost, easy maintenance, good airtightness of the machine slot, multi-feed and multi-point unloading, one feeder can transport materials in both directions at the same time, Processes such as mixing, agitation, loosening, heating and cooling of the materials can also be carried out during the conveying process.
The main disadvantage of the screw feeder: in the conveying process, due to the friction between the material and the machine slot and the spiral body and the stirring of the material by the spiral body, the machine slot and the spiral blade are easy to wear, and at the same time, the material has a certain crushing effect and the conveying power. It is expensive.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi