GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
The 3-in-1 feeder is one of the indispensable equipments in the peripheral equipment of the press. It has a high degree of automation. It has been used for many years in foreign countries. The technology is quite mature. The production line consisting of the punching machine has a small space. The simple process and short process press automation production line has gradually replaced the split press line to become the mainstream production line of the foreign stamping market.
The three-point combination of the 3-in-1 feeder is also called the pneumatic triple-piece. It is made up of three large parts of the filter + pressure regulating valve + oil mister. It is installed at the connection source to filter the water in the air. The adjustment of the air source pressure, the lubrication of the rear-end components, is an important guarantee for the long-term stable operation of the 3-in-1 feeder, and can greatly improve the service life of the 3-in-1 feeder.
The problem that the 3-in-1 feeder needs to pay attention to when using it:
1. The three-point combination oil mister has a visible window and the oil mist is adjustable. During the use process, the number of oil mist drops should be adjusted according to the actual demand, depending on the model of the 3-in-1 feeder.
2. When routinely maintaining and maintaining the 3-in-1 feeder, pay attention to timely discharging the water in the three-point combination filter in time to ensure that the air entering the 3-in-1 feeder is clean and dry.
3. When the 3-in-1 feeder uses a pressure regulating valve to adjust the air pressure, it should be stable between 4-5.5kg/cm2. There is also the need to clean or replace the filter element regularly. The use of the oil mister and pressure regulating valve should follow the principle of being large to small.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi