GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Clip Feeder, Guangzhou Metal Sheet Coil Stamping Processing, Punch Feeder
As the best feeding equipment for high-speed punching machines, the clip feeder is widely known by stamping owners. The feeding speed of the clip feeder is extremely fast, up to 1200 times/min, which can fully exert the best of all kinds of high-speed punching machines. Stamping performance.
When the clip feeder is used, the transmission device sequentially drives the feeding device and the relaxing device, and simultaneously introduces a pressurized air flow to actuate the shaft pin clamps of each seat body to lower, and clamps the clamp to feed the material, and the piston rod of the relaxation device cuts off the pressure. The air flow is fed by the tension spring jacking clamp and the jaws to feed the strip.
When the feeding device clamps the material in place, the pressure air flow is introduced into the top of the piston rod of the relaxation device to lower the pressure clamp and clamp the clamping material. At this time, the feeding mechanism cuts off the pressure air flow, and the tension spring lifts the pressure clamp And the clamp clamps the backlash and returns to the original position to feed the feed.
The punching device performs precise positioning action of each feeding strip stamping, and at the same time, the device is free from the gap, so that the strips are in a free state, and after the mold performs the stamping operation to produce the product, the next feeding and stamping production is continued.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi