GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Metal coil punching machine, Dongguan pneumatic feeder manufacturer
1. During the unwinding of the sheet, the pressing arm can apply pressure to the unrolled sheet to make the unwinding stable, and effectively avoid the phenomenon that the sheet is loose during the unwinding process, and at the same time cooperate with the pneumatic retaining arm and support The material arm can effectively solve the problem of sagging during the feeding process of the sheet;
2. In the process of unwinding the sheet, the friction between the sheet and the back sheet is large, and the positioning column has a certain gap between the sheet roll and the back sheet, which avoids the rubbing effect on the back sheet and ensures the sheet. Unwinding is stable.
3. the hydraulic loading trolley is equipped to make the feeding automation, safe and reliable, easy to use;
4. In the process of unwinding the sheet, the pneumatic stopper arm replaces the traditional A-type iron to restrain the sheet coil, avoiding the sheet coil from punching out of the spindle, effectively improving the safety of the sheet unwinding process, and simplifying the loading step.
When the large-tonnage hydraulic heavy-duty material frame is used, the coil material is placed on the hydraulic loading trolley, the hydraulic cylinder is used to adjust the height of the supporting mechanism, the motor is started, the sliding seat starts to slide on the sliding rail, and the coil is conveyed to the material rack. The outer periphery of the main shaft of the main shaft, and take out the end of the coil, so that it enters the leveling machine in China, the material of the pneumatic stopper arm is moved to the main shaft, and the end of the main shaft is placed in the card slot, and the cylinder is passed through the cylinder.
Drive, press the material frame nip roll on the material roll, open the material frame motor, the spindle starts to rotate, that is, the coil starts to unwind.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi