GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Rotary roller feeder, flat metal material leveling machine, Dongguan automatic feeder
The use of coil materials in stamping production can reduce production costs, facilitate transportation, reduce space occupation and advance the production of automated processing. Therefore, the use of coil materials in modern stamping processing has become the consensus of the industry. If the coil material is to be used in punch press processing, it needs special equipment to discharge and unwind it. The equipment stamping industry that realizes this function calls it a material rack.
The material frame is an essential component of the press production line equipment. It is usually divided into two types: horizontal material frame and vertical material frame according to different materials placement methods. Currently, the flat electronic feeder in the stamping industry is the only one. Material rack.
As the only horizontal feeder, the flat electronic feeder adopts the plane loading tray discharging method, which is not limited by the inner diameter of the coil. The tracker and pendulum provide the control signal frequency conversion automatic speed control unwinding, and the unwinding speed is fast. Stable, easy to load (multiple rolls can be stacked at the same time), fast unwinding speed (up to 30m/min), easy operation, etc., as long as it is used in high-speed presses for high-speed sheet metal stamping.
Pay special attention to the flat electronic feeding machine. Due to the horizontal discharge method, the applicable material width and thickness are strictly limited. The maximum applicable material thickness is 1.0mm, and the maximum applicable material width is 120mm. If it exceeds this range, the vertical type is required. If the material frame is beyond this range, the material will be too wide and the drag force on the pendulum bar will be too large when it is drooping, which will affect the normal operation of the unwinding of the material.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi