GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Material frame, sheet metal pneumatic feeder, Dongguan stamping peripheral automation
Heavy-duty material frame This single-axis discharging method ensures uniform torque. The main shaft can only be placed in the center of the base. This will not cause the loosening and tilting of the rotating shaft, but it will cause inconvenience in charging.
Ruihui double-head material rack is a new rack equipment that can solve the cumbersome material loading and time-consuming materials. The double-head material frame has a round-shaped base on the bottom, and the base adopts a thick and thin structure to effectively reduce the center of gravity of the rack, and a rotating seat is pivotally connected above the base, and the rotating seat is symmetrical on one side. The shaft body and the shaft body are composed of a fixed shaft and two expansion and contraction rolls wrapped around the fixed shaft. The design of the two expansion and contraction rolls ensures that the material frame can simultaneously place two coils.
When the double-head material frame is used, two rolls of material can be set on both sides of the expansion and contraction reel. When one roll of material is used, the rotary seat can be rotated through 180° and directly replaced with another roll of material. When another roll of material is used, the new roll is reloaded into the shrink-and-roll reel, so that the entire production line is in the process of stamping, without waiting for the loading process of the roll, which fundamentally improves the production efficiency.
On the other hand, since the two rolls are loaded on both sides of the same fixed shaft, the torque on the base and the rotating base is very small, the overall structural stability is high, and the service life of the material frame is fundamentally ensured.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi