GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Material frame, metal material roll stamping, Dongguan feeder feeding accuracy
The function of the material frame is to realize the discharging and unwinding of the plate material roll, which is an essential equipment for the automation of the stamping processing production.
The high-speed heavy-duty material frame has the traditional heavy-duty material and has a wide load capacity and wide application range (thin plate, medium plate and heavy plate coil can be used), and the degree of customization is high (the load capacity and the outer diameter of the material roll can be customized) advantage.
It can also realize high-speed unwinding (unwinding speed up to 30m/min), which is the most excellent high-speed unwinding equipment at present.
Compared with traditional heavy-duty material racks, high-speed heavy-duty material racks have greatly improved the appearance and structure of the models. The biggest change is the improvement of the expansion and contraction mechanism (using double-expanding shrinkage rolls) and the increase of crank locking devices. At the same time, the sliding sleeve with the inclined wedge surface was eliminated.
The high-speed heavy-duty material frame center pull rod drives the fan-shaped support material plate under the action of the spring's top pressure, so that it slides along the inclined wedge surface-crank locking device to maintain the reel of the reel.
Because of its double expansion and contraction structure, the volume expansion and contraction range can be about twice as large as that of a single expansion and contraction reel, and at the same time, the gap between the fan-shaped trays is large.
Therefore, it is easy to put the reeled roll onto the reel, and the elastic deformation of the reel when unwinding is uniform and the non-stationaryness is small, which fundamentally solves the problem that the material frame has high rotational resistance and difficulty in discharging at high speed unwinding. The problem is to ensure stable and reliable performance at high speed unwinding.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi