GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Disc Feeder, Metal Roll Stamping, Guangdong Punch Stamping Feeding Equipment
Although the name of the feeder of the disc feeder is actually a material rack, the name of the disc feeder is due to the fact that it uses a horizontal disc to horizontally place the coil, which can be quickly transported to the subsequent matching machine. material.
As the only horizontal material rack in the stamping industry, the disc feeder is the rack equipment developed by Ruihui Machinery for thin plate, narrow material and high speed stamping.
The utility model has the advantages of fast unwinding speed, no restriction on the inner diameter of the material, simple stacking, multi-roll stacking, simple operation, perfect speed synchronization by frequency conversion and speed regulation, and no scratching on the surface edge of the material.
1. The disc feeder has a fast unwinding speed and is suitable for use with any high-speed punching machine; the high-speed punching press has a fast stamping speed, which puts a rigid requirement on the running speed of the material rack and the leveling machine, and the feeding speed can reach 30m/min makes it suitable for any high-speed punch press production.
2. The disc feeder is not limited by the inner diameter of the coil. The coils can be stacked, and the feeding is simple and quick, and the refueling time is greatly saved.
Vertical material racks are all used in the tensioning and unloading method of the drum. Therefore, there is strict requirement on the inner diameter of the coil, and only one coil can be placed in one coil, and manual manual tensioning material is required. Rolls, loading is cumbersome, and it takes a long time to refuel a roll of material.
3. The disc feeder tracker can detect the unwinding speed in real time and automatically adjust the speed of the inverter to achieve the perfect match with the stamping production of the high-speed punch.
4, can be customized double-layer disc feeder, to meet the needs of customers double belt stamping production. The double-material belt stamping production line refers to the punching production of two strips in one time, and is the most advanced stamping production process.
It is also the inevitable trend of the industry, and the double-material belt stamping requires double-tape unwinding, leveling and feeding equipment. The double-layer disc feeder is the only one that can realize the double-tape simultaneous unwinding.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi