GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Stamping Automation Metal Sheet Straightening Machine Hardware Auto Parts Processing
Heavy-duty material rack is the most used material for unloading and unwinding in stamping automation production. It has the advantages of economical price, simple operation, low failure rate and high degree of automation. It is the first choice for discharging equipment in automatic punching production.
The models of heavy-duty material racks are divided according to the maximum width of the coils that can be placed. There are 14 types of standard MT-200 to MT-1500, each of which has a standard inner diameter and outer diameter. The basic parameters of diameter and load capacity.
1. Find out the basic parameters of the material, width, thickness, weight, inner diameter and outer diameter of the material of the stamping material.
The heavy material rack is a vertical discharging device. The coil material is fixed on the expansion and contraction reel of the material rack, so the inner diameter, the outer diameter and the load capacity are bound to be limited. In many cases, the standard material rack type is not It must be suitable for customers. At this time, the manufacturer can be customized according to the actual inner diameter, outer diameter and load capacity.
It is also necessary to clarify the material and thickness of the material. When the material has a high hardness and a large material thickness, a press arm is required to prevent the material from being affected by the unwinding of the material.
2. Find out the space of the factory and the situation of the follow-up machine. The heavy-duty material frame has two kinds of power and power. The unpowered heavy-duty material itself has no power and is unwinded by the subsequent machine pulling. The waiting area is relatively short, but there is loss to the subsequent machine motor.
3. Comprehensive considerations determine whether heavy-duty material racks need to be equipped with optional inverters, oil pressure expansion, pressure arm, photoelectric sensing device, and loading trolley.
The photoelectric sensing device is used for replacing the contact type sensing rod for the material frame to unwind the non-conductive material, and when the material surface is coated with the film material, the material frame is controlled to start and stop; the loading trolley is used for automatic feeding of the coil material.
products:
规格: Specification
| 型号Model | MAC4-400 | MAC4-600 | MAC4-800 | MAC4-1000 | MAC4-1300 |
| 板幅Stock Width(mm) | 70~400 | 70~600 | 70~800 | 70~1000 | 70~1300 |
| 板厚Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
| 卷材重量Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 7000 | 7000 |
| 卷材外径Max.Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 | 1400 |
| 卷材内径Coil I.D.(mm) | 508 | 508 | 508 | 508 | 508 |
| 最大送料长度Feed Length(mm) | ~500※ | ~500※ | ~500※ | ~500※ | ~500※ |
| 生产线速度Max.Line Speed(m/分) | 16~24 | 16~24 | 16~24 | 16~24 | 16~24 |
| 工作滚轮Work Roll Number(支) | 上upper4/下lower3 | 上upper4/下lower3 | 上upper4/下lower3 | 上upper4/下lower3 | 上upper4/下lower3 |
| 送料滚轮Feed Roll number(组) | 1 | 1 | 1 | 1 | 1 |
| 主电机Main Motor(kw) | AC5.5 | AC7.5 | AC7.5 | AC11.0 | AC11.0 |
| 料架扩张方式Mandrel Expansion | 油压hydraulic | 油压hydraulic | 油压hydraulic | 油压hydraulic | 油压hydraulic |
| 料架电机Reel Mot or(kw) | 2.2 | 2.2 | 3.7 | 3.7 | 3.7 |
| 使用电源电压Power (V) | 三相 3Phase 220V/380V/50HZ | ||||
| 使用空型压Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | 0.49 |
矫正能力表 Straigtening performance
| 型号Model | MAC4-400 | MAC4-600 | MAC4-800 | MAC4-1000 | MAC4-1300 | |||
| 板幅(mm)Stock Width | 0.6~1.3 | 400 | 600 | 800 | 1000 | 1300 | ||
| 2.0 | ||||||||
| 2.3 | ||||||||
| 2.5 | 1170 | |||||||
| 2.8 | 933 | 933 | ||||||
| 3.2 | 714 | 714 | 714 | |||||
| 4.0 | 457 | 457 | 457 | 457 | ||||
| 4.5 | 361 | 361 | 361 | 361 | 361 | |||
| 5.0 | 293 | 293 | 293 | 293 | 293 | |||
| 6.0 | 203 | 203 | 203 | 203 | 203 | |||
※上表中的降服点应力为245N/mm2(拉伸强度为392N/mm2).
※The above flgures are the material having yield strength of 245N/mm2 (tensile strength of 392N/mm2).