GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Leveling Coil Feeder Straightener , 3 In One Feeders For Cable Processing
The 3-in-1 feeder is more and more widely used in stamping production due to energy saving, land saving and easy operation. However, the traditional 3-in-1 feeder has a manual manual assist problem. Automated stamping production.
In order to realize the fully automatic use and operation of the 3-in-1 feeder, Ruihui Machinery changed the pallet of the flattening feeder head to the material head bending and flattening device, and used the active displacement of the folding arm to roll the material. Clamp the head.
Then, the oil leveling head leveling device is used for pre-leveling, and the 3-in-1 feeder pressing arm, the feeding arm and the blocking arm are fully automated, and the operator only needs to point on the touch screen on the console. The control operation can be carried out, the feeding is fast and stable, and the efficient and safe feeding is fundamentally ensured.
When the Ruihui 3-in-1 feeder is actually used, the hydraulic loading trolley is used as the material rack for loading, and then the oil pressure is used to expand the tensioning coil, and the 3-in-1 feeder console touch screen is used to control the compression. Roll.
Then raise the support arm to hold the material roll, put down the pneumatic stopper arm, and manually rotate the stopper arm handle so that the stopper arm stopper guide column abuts against both sides of the coil, so that the material roll cannot be shaken left and right.
Cut the winding cable tie, and after the material is supported by the supporting arm for several times, it is automatically fed into the feeding port of the folding arm, and then the folding arm is pressed downward, and the folding arm roller is axially rotated to make the material head enter. In the hydraulic leveling head unit, after pre-leveling, it smoothly and quickly enters the leveling feeder head, which is simple, quick and automatic.
Products:
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi