GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Metal Material Processing Decoiler Straightener Feeder Hydraulic Heavy Material Rack
The stamping automation production must use the coil material, and the coil material must be equipped with professional discharging and unwinding equipment. The heavy material rack is expensive, the load capacity is large, the failure rate is low, and the vertical discharge outer diameter can be customized. The features have become the preferred material for unloading and unwinding of stamping customers.
At present, the heavy-duty material racks in the stamping industry use the manual tensioning method. Although some light-weight coils can be tensioned, the labor intensity is large, the operation is relatively cumbersome, and once the customer rolls the weight, the loading tension is a Very big problem.
Therefore, the stamping market urgently needs a heavy-duty material frame with automatic tensioning function, and the Ruihui hydraulic heavy-duty material frame was born.
Similarly, under the action of the Ruihui hydraulic heavy-duty material frame control system, the incompressible liquid is returned to the hydraulic station. At this time, the external atmosphere will cause the pull rod to drive the front adjustment sleeve and the rear adjustment sleeve to approach the main shaft. The axial movement of the fixed seat causes the support tile to move radially along the guide pin near the center of the spindle to tighten the outer blade.
Thereby, the diameter of the expansion and contraction reel consisting of a plurality of sets of blades becomes small. Since the oil pressure heavy material frame has a flat key on the main shaft, the front adjustment sliding sleeve and the rear adjustment sliding sleeve are provided with a key groove matching the flat key on the main shaft.
Therefore, when the spindle of the material frame rotates, the front adjustment sliding sleeve and the rear adjustment sliding sleeve are synchronously rotated, and the front adjusting sliding sleeve and the rear adjusting sliding sleeve are then rotated synchronously by the supporting block and the connecting rod to realize the discharging.
Products:
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi