GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
High Performance NC Metal Sheet Feeder Stamping Processing Automation Equipment
With the continuous improvement of product quality and output demand by stamping customers, the accuracy and stability requirements of automatic equipment such as feeders are getting higher and higher, and the feeder manufacturers are in order to meet the needs of customers.
Continuously increase R&D innovation and technical capital investment, accelerate the technical research and development and improvement of new feeders, and NC servo feeders are world-class designed and manufactured to meet customers' increasingly high feed accuracy requirements. Horizontal punch feeder.
Although it is a rising star in the stamping industry, its high precision, high stability, and multi-purpose use are widely used by stamping customers, and gradually replaced the roller feeder as the industry's leading feeding equipment.
The NC Feeder introduces the most advanced servo control system into the press feeding equipment, and with the special timing belt drive system, it ensures stable and high-precision operation in continuous high-speed feeding operations.
Improvement of NC Feeder: Firstly, the traditional threaded knob is changed from the traditional threaded knob to the handle lifted retaining wheel to help customers locate the material faster and more accurately.
Secondly, the imported bearing steel is used to replace the traditional 45# steel in the feeding drum processing, and it is heat treated, hard chrome plated and then precision ground to ensure its high wear resistance and long service life;
Finally, in the matching of the feeding electrical control system, the Japanese Mitsubishi PLC + Japan Yaskawa servo motor + Taiwan Weilun touch screen is used to form an optimized electronic control system, which fundamentally ensures ultra-high feeding accuracy, and the precision can reach ±0.01mm.
Products:
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi