GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Air feeder, metal forming material stamping, stamping automation
When the air feeder is working, it is installed on the feeding end of the punching machine in the stamping automatic production line through the mounting plate. The material is fed along the inlet stopper wheel, and the fixing plate is clamped by the control system. When the clamping plate is working, the piston is moved to the piston. The upper space is filled with air to push the piston down, and the piston pushes the splint to hold the material against the return spring force.
When the upper part of the piston passes through the atmosphere, under the action of the return spring force, the piston and the clamping plate are reset to release the material; the feeding cylinder works, and the moving clamping plate is pulled to finely adjust the screw movement to the feeding length until the moving clamping plate is pressed against the feeding length fine adjustment screw.
At this time, the feeder moves the clamping plate to clamp the material, and the fixing clamping plate is loosened. Then, the feeding cylinder reverses the intake air, and pushes the moving clamping plate to move in the direction of the fixed clamping plate until the moving clamping plate moves to the limit position, and when the feeder moves the clamping plate, Drag the material to a certain distance.
Then fix the clamping plate to clamp, move the clamping plate to loosen, repeat the above work process, the air feeder moves the clamping plate and the fixed clamping plate to work alternately, the material can be fed into the punching machine in a stepwise manner, and the cylinder stroke adjustment is realized by adjusting the feeding length fine adjustment screw. The width of the stamping material is made to meet the production requirements, the material is continuously fed into the punching machine, and the entire automated production is completed by punching.
The air feeder can realize automatic control because of the accurate feeding distance per step, which can shorten the initial feeding time and improve the production efficiency. At the same time, it avoids material migration during the stamping process and effectively prevents material vibration.
Products:
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi