GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. AUTOMATION SOLUTIONS FOR ALL METAL FORMING STAMPINGS APPROACHING RUIHUI, NEW AUTOMATION TECHNOLOGY IS UPGRADED.
Add to Cart
Air feeder punching and feeding equipment, automatic stamping feeding precision, punching processing
Air feeder principle and advantages and disadvantages
The air feeder is the earliest feeding device used in the stamping industry. Its principle is to use the air source as the power.
The material is clamped by the cylinder and fed by the telescopic stroke of the cylinder. The adjustment of the feed length is controlled by the length of the stroke of the cylinder.
Air feeder advantages: easy to operate, easy to install, affordable, and can achieve automatic stamping feeding equipment at the lowest price. In actual production, it is mainly used for feeding of stamping products with low precision and fast speed.
Disadvantages of air feeder: easy to damage materials, O-ring wear has an impact on the feeding accuracy.
The length of the air feeder needs to be fed. Firstly, loosen the fixed fine adjustment screw under the stopper of the feeder. Remove the length fine adjustment screw, then load or unload the air feeder to open the spacer to increase or decrease the feed ruler.
If you need to connect to any size, you must adjust the fine adjustment screw of the feed length, but when the fine adjustment screw rotates clockwise: the air feeder feed length is shorter.
If the fine adjustment screw rotates counterclockwise, the air feeder feed length is longer, but the fine adjustment screw rotates counterclockwise to make the feed length longer, but the fine adjustment screw rotates one turn and its feed distance is 1mm.
The feed length fine adjustment screw must be removed before removing the air feeder spacer ring. The more the spacer ring is removed, the longer the feed length.
Specifications:
| Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F |
| Stock Width(mm) | 70~600 | 70~800 | 70~1000 | 70~1300 |
| Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
| Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 10000 |
| Max.Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 |
| Coil I.D.(mm) | 508 | 508 | 508 | 508 |
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* |
| Max.Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 |
| Work Roll Number(piece) | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 |
| Feed Roll number(set) | 1 | 1 | 1 | 1 |
| Main Motor | AC7.5 | AC11.0 | AC11.0 | AC11.0 |
| Mandrel Expansion | Hydrauilc | Hydrauilc | Hydrauilc | Hydrauilc |
| Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 7.5 |
| Power(v) | 3 Phase 220V/380V/50HZ | |||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straightening Performance:
| Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F | |
| Stock Thickness (mm) | 0.8~2.3 | 600 | 800 | 1000 | 1300 |
| 2.8 | 933 | 933 | |||
| 3.2 | 714 | 714 | 714 | ||
| 4.0 | 457 | 457 | 457 | 457 | |
| 4.5 | 361 | 361 | 361 | 361 | |
| 5.0 | 293 | 293 | 293 | 293 | |
| 6.0 | 203 | 203 | 203 | 203 | |
Products:
1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.